How to Handle a Heavy Motorcycle: Top Tips
June 2, 2022
- Tilt your motorcycle and Sit-up Straight When Making Sharp Turns: Making tight turns requires leaning and steering. So when making a tight right turn, you should lean your bike to the right and then extend your right foot in that direction. This trick will ensure that you make the turn immediately. But make sure you are seated straight when turning.
- Handle the Clutch and Brakes Smoothly: You should never put a lot of pressure on the clutch and throttle. Cruising smoothly gives you perfect control over its speed and handling. Plus, when riding at low speed, you don’t have to use the front brakes. And that is because using the front brakes will force the weight to move to the front suspensions causing you to lose balance. Simply stop the bike using the rear brakes and then put your left foot down for full control. The front brakes should only be used when stopping immediately.
- Always keep your head up: When cruising slowly in traffic, you should always keep your head up and focus on the road ahead. Looking straight ahead can help you understand the traffic and know exactly when to slow down or stop. Keeping your head up can help you focus more on the road and reduce the likelihood of causing an accident.
- Choose a solid footgear: Make sure you invest in high-quality boots that can provide superior protection and a better foothold. A solid pair of riding boots can prevent slippage and reduce abrasion when taking sharp corners.
- Use the feet when turning: Taking a sharp corner with a heavy bike can be quite challenging in a movement position. Therefore, when riding a heavy bike, you can use your right foot when turning to the right and left when turning to the left. This technique will help you take turns easily, even when cruising at high speed. Putting your right foot down when turning to the right can help you adjust your sitting position and turn easily.
Comments